Play Musical Instruments

Creative Musical Instruments
Music is love in search of a word.
-- Sidney Lanier
 

Instrumental Music
Back to Home Page Back to List

Multiple words search ALL terms.
 

Click picture for details.
Amplifiers - QSC

QSC Audio RMX 5050 Professional Power Amplifier
Our Price: $1,499.00


QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability. Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD. Like all RMX amps, the RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon™ outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. Features: The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications Dual mono, high current power supply for increased reliability and performance 3RU chassis only 16" deep Professional quality performance—incorporates road-proven QSC designs High-current toroidal transformers for greater two-ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility Binding post and Neutrik Speakon™ outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance 3-year warranty. An optional 3-year extended service contract is available. Ask your dealer for details. RMX 5050 AMPLIFIER STEREO MODE, Both Channels Driven 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts 8 ohms EIA 1 kHz 0.1% THD 1100 Watts 4 ohms EIA 1 kHz 0.1% THD 1800 Watts 2 ohms EIA 1 kHz 1% THD 2500 Watts BRIDGE-MONO MODE 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts 8 ohms EIA 1 kHz 0.1% THD 3600 Watts 4 ohms EIA 1 kHz 1% THD 5000 Watts Distortion (SMPTE-IM) Less than 0.02% Distortion (Typical) 20 Hz-20 kHz: 10 dB below rated power 1 kHz and below: full rated power Less than 0.02% Less than 0.02% Frequency Response 20 Hz to 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB Damping Factor Greater than 250 @ 8 ohm Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load) Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms Controls Front: Controls Rear: AC power switch, Ch. 1 and Ch. 2 gain control 10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel. Voltage Gain 64x (36 dB) for 8 ohm load Input Impedance 20 k ohm balanced, 10 k ohm unbalanced Indicators Power-On: Green LED, Protect: Red LED Signal -30dB: Yellow LED, Clip: Red LED Connectors Input: Connectors Output: XLR female, TRS (1/4-inch), and barrier-strip screw terminals, each channel Binding posts and Speakon outputs (Ch. 1 Speakon wired for biamp) Cooling Continuously variable-speed fan, rear-to-front air flow Amplifier Protection Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads Load Protection On/off muting, DC fault output crowbar Power Requirements 100, 120 or 240 Volts AC (±10%) 50-60 Hz (factory configured)120V models require 20 Amp, 120V service and are supplied with a NEMA 5-20 plug on the cordset. Dimensions 19" 19.0" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39 cm) overall depth Weight 75 lb (34.02 kg) net, 87 lb (39.46 kg) shipping All Specification Subject to Change Without Notice.

 

Note: Every effort is made to show  current prices. However, the official price of the partner merchant, after you "Click Here to Order", may have recently changed (lower or higher). If this is the case, please accept my apologies (or congratulations) depending on the circumstance. Have a creative day! ~ FRANK

 
All About Musical Instruments The Lighter Side of Musical Instruments A Month of Musical Quotes Music is... The Creative Music Shop 


Be More Creative
Perfumes Advertise Here!    Vintage Art Advertise Here! Insanity Sauce Advertise Here!

Please visit these other fine BeMoreCreative stores!

copyright 2005, Baertracks, bemorecreative.com

Creative Musical Instruments is a member of the bemorecreative.com family. Each website is designed to encourage thinking, working and living creatively. Please browse creatively!