|
Many years of experience from producing disco cartridges, and a close contact to DJ's, have resulted in several lines suitable for all tonearms and all amplifiers. The Ortofon disco cartridges are available in inch versions for mounting in standard headshells or in the elegant integrated Ortofon Concorde design - for direct mounting in tonearms with standard sockets. For easier cueing, the nose of all the Ortofon disco cartridges has an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent. Specifications: Output voltage at 1000 Hz, 5cm/sec. 7,5 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 25 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-15.000 Hz +3 / -2 dB FIM distortion at recommended tracking force, DIN 45.542 Tracking ability at 315Hz at recommended tracking force 80 m Compliance, dynamic, lateral 6 m/mN Stylus type Spherical Stylus tip radius R 18 m Equivalent stylus tip mass 0,6 mg Tracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN) Tracking angle 20 Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus White/White Cartridge weight 5 g Replacement stylus unit Elektro
|
