|
Mackie CFX·16 16x4x2 Compact Sound Reinforcement Mixer w/On-Board Effects The new CFX™ Series are the first "effects" mixers that meet Greg Mackie's stringent standards for sound quality, low noise and high headroom. Mackie's Digital Engineering staff contributed sophisticated EMAC™ 32-bit digital effects that are the equal of outboard processors. They spent a ridiculous amount of time perfecting a graphic EQ section. And they packed the CFX Series mic/line mixers with extra features. Features: High-headroom mic preamps with RF rejection 16 channels (12 mic/line mono, and 2 stereo line channels) 32-bit EMAC™ digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander External and internal EFX sends EFX to Monitor control 9-band stereo graphic equalizer Inserts on all mic channels and main mix True 4-bus design with direct sub outs and L/R assign 2 Pre/Post Aux sends and internal/external FX level sends on each channel 3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels 4-band EQ on stereo line channels Pan, Mute, PFL solo on each channel Inserts and 100Hz low-cut filters on all mic/line channels Subwoofer output from built-in 18dB/oct. 75Hz crossover Ingenious BREAK switch Headphone output with level control Tape/CD inputs with level control assignable to Main Mix via Break switch Logarithmic taper 60mm faders 48V phantom power 12V BNC lamp jack Specification: Frequency Response: Mic Input to any Output Trim at 0 dB 32Hz to 20kHz +0, -1 dB, Distortion: THD and SMPTE IMD; 20Hz to 20kHz Mic Input to Main Output Noise: 20Hz to 20kHz BW (150 Ohms source impedance) Equivalent Input Noise (EIN) -127 dBu Residual Output Noise Main, Monitor, & Effects outputs Channel & Master levels off -95 dBu Common Mode Rejection Ratio:(CMRR) at 1kHz, Trim at 0 dB 60 dB Crosstalk: Adjacent Inputs or Input to Output -90 dB at 1kHz Fader Off -90 dB at 1kHz Mute Switch and Break Switch Mute -80 dB at 1kHz Input Level Trim Control Range: +6 to -50dB Phantom Power: +48V DC Equalization: Low Cut 100Hz, -18dB/octave Mono Channel EQ High: ±15dB at 12kHz Mid: ±15 dB at 100Hz to 8kHz Low: ±15 dB at 80Hz Stereo Channel EQ High: ±15 dB at 12kHz High Mid: ±15 dB at 3kHz Low Mid: ±15 dB at 400Hz Low: ±15 dB at 80Hz Graphic EQ (9 bands): ±15 dB Q =1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1k, 2k, 4k, 8k, 16kHz Mixer Rated Output: Main, Sub, Aux, & Efx: +4 dBu Maximum Rated Output: +20 dBu Maximum Input Levels: Mic input Trim at +6 dB +18 dBu Line Input Trim at -15 dB +38 dBu Insert Return, Stereo Line Input, Tape Input, and Effects Return +20 dBu Maximum Voltage Gain: Mic input to… Insert Output: 50 dB Tape Output: 66 dB Sub Output: 66 dB Main Output: 76 dB Aux Send: 71 dB Line Input to… Insert Output: 30 dB Tape Output: 46 dB Sub Output: 46 dB Main Output: 56 dB Aux Send: 51 dB Stereo Line Input to… Tape Output: 40 dB Sub Output: 40 dB Main Output: 50 dB Aux Send: 45 dB Tape Input to Main Output: 30 dB Effects Return to Main Output: 30 dB Input Impedance Mic Input: 3 kilohms, balanced Line Input: 40 kilohms, balanced Insert Return, Stereo Line Input, Tape Input, and Effects Returns: 10 kilohms, unbalanced Output Impedance: Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends 150 Ohms Digital Effects Resolution 32-bit EMAC processing, 2-channel Number of Presets 16 Parameters 2 controllable Channel Level Set LED (Sensitivity): 0 dBu (normal operating level) VU Meters: Main L/R 12 segments Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20,-30 Weight: 21.0 lbs (9.5kg)
|
