|
Mackie 808S 1200-Watt Stero 8 Channel Powered Mixer The same power amp structure as the 808M mono mixer, plus stereo I/O capability and several other important additional features. Twin 500W FR Series amps deliver 1,000W @ 4 ohms and are switchable as mains or main/monitors. 8 mic/line channels feature master phantom power, inserts on 1-6. 1/4" stereo inputs on channels 7 and 8, stereo pan control on all 8 channels, true stereo 9-band graphic EQ on mains, plus a 9-band for the monitors. It includes a 32-bit custom EMAC® digital effects processor with 16 different effects and 2 controllable parameters per effect, a special EFX WIDE effects-enhancement switch, and a way-cool Break switch that mutes channels 1-6 during breaks. It also features Mackie's renowned discrete mic pre-amps (the best found on any powered mixer), and an amp-routing switch that lets you assign power amps to mains only or mains and monitors. An external effects section has separate sends and returns, plus a footswitch jack to override internal and external effects. Mixer line-out jack lets you add extra power amps. 8 mic/line channels feature master phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel is provided with 3-band EQ and separate 9-band graphic EQs are provided for mains and monitors. Features: 1200 real watts/2 ohms from twin 600-watt FR Series High-Current power amps Power amps switchable as stereo mains or main plus monitor 8 mic/line channels with master phantom power Stereo line inputs on channels 7 and 8 Inserts on channels 1-6 Active 3-band EQ and stereo pan control on each channel True stereo 9-band graphic EQ on mains 9-band graphic EQ on monitor Specification: Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output Mic Input to Power Amp Output Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence Equivalent Input Noise (EIN): -127 dBu Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu Main Mixer Output Noise with Master at nominal (-10dB), all channels off: -92 dBu with Master and one input at nominal (-10dB and -20dB), Trim at 0dB: -85 dBu Crosstalk, at 1 kiloHertz: Adjacent Inputs or Input to Output: -90 dB Fader Off: -90 dB Break Switch Mute: -80 dB Input Level Trim Control Range: 0 to -40dB Phantom Power: +15V DC Equalization: Rumble Reduction 75hz, -18dB/octave Channel EQ High 15dB at 12kHz Mid 12dB at 2.5kHz Low 15dB at 80Hz Graphic EQ: 9 bands, 15dB, Q=1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16KHz Main Mixer Section Rated Output: Main Mixer, Monitor, and Effects +4 dBu Maximum Main Mixer Section Output +20 dBu Input Sensitivity (Minimum Input Level to produce +4dBu at Main Mixer Output) Mic Input: -68dBu Insert Input: -28dBu Line Input: -48dBu Stereo Line Input: -28dBu Tape Input: -18dBu Effects Return: -18dBu Maximum Voltage Gain: Mic Input to… Insert Output: 40dB Tape Output: 60dB Main Mixer Output: 72dB Line Input (Mono) to… Insert Output: 20dB Tape Output: 20dB Main Mixer Output: 52dB Stereo Line Input to… Tape Output: 20dB Main Mixer Output: 32dB Tape Input to… Tape Output: 10dB Main Mixer Output: 22dB Effects Return to… Main Mixer Output: 22dB Monitor Output: 22dB Input Impedance: Mic Input balanced 3 kilohms Insert Input unbalanced 10 kilohms Line Input balanced 40 kilohms Stereo Line Input unbalanced 10 kilohms Tape Input unbalanced 10 kilohms Effects Return unbalanced 10 kilohms Power Amp In unbalanced 10 kilohms Output Impedance Main Mixer Output 150 ohms Insert Output 150 ohms Tape Output 150 ohms Monitor Output 150 ohms Effects Send 150 ohms Power Amp Out 0.032 ohms at 1kHz Digital Effects: Resolution 32-bit EMAC internal processing, 2-channel Sample Rate 31.25 kHz Bandwidth 15.6 kHz VU Meters: Main and Monitor, eight segments Clip, +5, 0, -5, -10, -15, -20, -30 Maximum Power at 1% THD, midband (both channels driven) 2 ohms: 600W x 600W per channel 4 ohms: 450W x 450W per channel 8 ohms: 300W x 300W per channel 2 ohms: 1200W total Continuous Sine Wave Average Output Power, 40Hz to 20kHz (both channels driven at rated power) 340W per channel, 4 ohms: no more than 0.15% THD 240W per channel, 8 ohms: no more than 0.10% THD Power Bandwidth: <10Hz to 30kHz (+0, -1dB) at rated power into 4 ohms Frequency Response <10Hz to 30kHz (+0, -1dB) <10Hz to 55kHz (+0, -3dB) Distortion (THD, SMPTE IMD): 4 ohms: <0.15% 8 ohms: <0.10% Signal-to-Noise Ratio: <105dB below rated power into 8 ohms Channel Separation: >75dB at1 kHz Damping Factor: >250dB at1 kHz Amp Input Impedance: 10k ohms unbalanced, 20k ohms balanced Continuous Sine Wave Average Output Power (both channels driven at rated power into 4 ohms): 1.76V (+7.1dBu) Gain (amp in to speaker out): 26.4dB(21V/V) Maximum Input Level: 9.75V (+22dBu) Rise Time: < 6.2 s Slew Rate: > 50V/ s Load Angle: 8 ohms, time independent: 8 (±jx) 4 ohms, time dependent: 4 (±jx) High Frequency Overload and Latching: No latch up at any frequency or level High Frequency Stability: Unconditionally stable driving any reactive or capacitive load Physical: Height: 11.7 inches (297mm) Width: 20.5 inches (521mm) Overall Depth: 13 inches (330mm) Weight: 36 lbs (16.3 kg)
|
