|
JBL ESK15 Suspension Kit for EON 15" Speakers Application: The ESK10 and ESK15 are hardware kits that permit the installation of JBL EON speaker systems in venues where overhead suspension of the system is required. Description: The ESK15 is a suspension kit that may be retrofitted to EON 15 models (except EON1500). It consists of two primary parts; the top bar and the pullback bar. These parts are drilled to accept forged shackles having a bolt diameter of 1/4" (.6 cm). The ESK10 is a suspension kit that is designed for use with EON 10 models. It consists of two brackets that are mounted at the upper corners of the speaker, a pullback bar, and the required spacers and screws. Note that the required 1/4" (.6 cm) forged shackles and other hardware are not included with the kits. Caution: Unsafe mounting or overhead suspension of any heavy load can result in serious injury and equipment damage. Suspension of speakers should be done by qualified persons following safe rigging practices in accordance with all applicable local safety and construction standards. Before selecting a mounting point, be certain that it is capable of supporting the weight of the speaker to be suspended. Suspension Hardware for EON Speaker Systems ESK10/ESK15 Do not use any hardware, bracket or fastener if it is damaged. Replace any damaged or suspect parts with the proper type prior to installation or suspension. Periodically inspect all hardware, fittings and brackets for damage and replace/re-torque as required
|
