|
Specifications Warranty Enlarged View Panel View Panel View 2 Intelligent dynamic control Our INTELLIGATE XR2000 was designed to fulfill the highest demands and offers maximum signal control. Voice-over applications, creative envelope shaping, noise suppression in quiet passages... No problem, especially with the transparent user interface and "traffic light" LED displays. UTR (Ultra Transient Response) gate circuit Slow noise gates often rob your audio's brilliance by gating signals during the attack phase. BEHRINGER's UTR circuitry prevents this with its ultra-fast signal detectors and high-quality class-A VCA. Clicks and pops at the gating point are virtually eliminated by the extremely low leakage of the control signal into the VCA's audio signal path. An extremely important factor in judging the quality of a gate. IRC (Interactive Ratio Control) expander circuit The INTELLIGATE XR2000 features an IRC expander, which virtually eliminates all switching noises. Even at ratio values above 1:8, the XR2000 always sounds musical with practically no side effects. Success is pre-programmed! Features Popular "industry standard" Interactive stereo expander/gate/ducker used by leading engineers and artists around the world. Exceptional signal control from a specially developed 3-stage envelope and unusually wide parameter ranges. Frequency-sensitive triggering for maximum separation. High-performance Class-A VCAs. Can be used to eliminate noise during pauses, for program "ducking" during voice-overs, reducing crosstalk between adjacent microphones, auto-muting stage and conference mics, separating drum mics and much more. Super fast Ultra Transient Response Gate preserves transients. No clicks, pops, or "chatter" regardless of attack speed. Switchable external Key Input and Key Listen. Highly precise high and low pass key filters. Attack, Hold, and Release controls. Large, visible Signal/Threshold "traffic light" LED display. Accurate 8-point gain reduction meters. Servo balanced inputs and outputs on XLR and 1/4" connectors. Technical Description Analog Inputs Connectors: XLR and 1/4" jack Type: RF filtered, servo-balanced input Impedance: 80 kW, balanced Max. input level: +20 dBu balanced and unbalanced CMR: @ 1 kHz > 40 dB Key Input Connectors: 1/4" jack Type: C de-coupled, unbalanced input Impedance: 20 kW Max. input level: 20 dBu Analog Outputs Connectors: LR and 1/4" jack Type: electronically servo-balanced output stage (optional transformer-balanced), automatic level correction for unbalanced use (correction = 6 dB) Impedance: Max. output level: +26 dBm balanced, +20 dBm unbalanced Key Input Connectors: 1/4" jack Type: DC de-coupled, unbalanced input Impedance: Max. input level: +20 dBu System Specifications Bandwidth: 5 Hz to 100 kHz, +0/-0.2 dB Noise: > -96 dBu, fully off THD: 0.01 % typ. @ +4 dBu, 1 kHz, gain 1 Crosstalk: > -85 dBu @ 20 kHz Gate Section Type: UTR (Ultra Transient Response) gate Threshold variable: (-50 dBu to +20 dBu) Attack variable: (3 s to 90 ms) Hold variable: (8 ms to 4 seconds) Release variable: (10 ms to 2 seconds) Range variable: (0 to 100 dB) Expander Section Type: IRC (Interactive Ratio Control) expander Ratio variable: (1.2:1 to 30:1) Key Filter Section Low cut variable: (30 Hz to 3 kHz, 12 dB/oct.) High cut variable: (150 Hz to 15 kHz, 12 dB/oct.) Function Switches In/Out relay controlled hard-bypass Filter inserting the internal key filters Key external switching to the external key input Key listen monitoring the external key input Ducker switching to ducker mode Couple linking both channels for stereo operation Indicators 8 element gain reduction meter 1/3/6/10/15/20/30/40 dB Below LED key signal level is below the threshold Hold LED key signal level is at threshold Above LED key signal level is above threshold LED indicator for each function switch Power Supply Mains voltages: USA/Canada- 120 V ~, 60 Hz UK/Australia: 240 V ~, 50 Hz Europe: 230 V ~, 50 Hz general export model: 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz Fuse: 100 - 120 V ~: T 320 mA H 200 - 240 V ~: T 160 mA H Mains connection: standard IEC receptacle Physical Dimensions: 44.5 x 482.6 x 217 mm (1- x 19 x 8-1/2 in.) Net weight: approximately 3.2 kg Shipping weight: approximately 4.5 kg
|
