|
Specifications Manual Warranty Alternate View Interactive Tube Dynamic Processor The Behringer Composer Pro has become the industry standard compressor for numerous applications. Today, you'll find stacks of Composer Pro's in the racks of professional touring companies as well as in leading studios the world over. Now there's a device that combines the Composer's famous interactive concept with modern tube technology: the Tube Composer T1952. Features: Special "Warmth" control and selected 12AX7 tubes allow you to precisely add the desired amount of tube sound to your audio IKA (Interactive Knee Adaptation) combines "soft knee" and "hard knee" characteristics Automatic or manually controllable attack and release times Switchable high-pass filter and monitor function for side chain Compression switchable between "interactive knee" and "hard knee" operation IGC (Interactive Gain Control) peak limiting circuit combines clipper and program limiter IRC (Interactive Ratio Control) expander/gate circuit for gentle disturbance suppression Precise displays for input and output level and gain reduction Stereo link function Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors Relay-controlled hard bypass switch with auto bypass function in case of power failures (safety relay) Manufactured under ISO9000 certified management system Audio Input Connectors: XLR and 1/4 in. TRS jack Type: RF filtered, servo-balanced input Impedance: 50 kOhm balanced, 25 kOhm unbalanced Nominal Operating Level: +4 dBu/-10 dBV switchable Max. Input Level: +21 dBu balanced and unbalanced CMRR: typ. 40 dB, >55 dB @ 1 kHz Audio Output Connectors: XLR and 1/4 in. TRS jack Type: electronically servo-balanced output stage(optitional transformer-balanced) Impedance: 60 Ohms balanced, 30 Ohm unbalanced Max. Output Level: +21 dBu, +20 dBm balanced and unbalanced SC Input Connector: 1/4 in. TRS jack Type: RF filtered, DC de-coupled, unbalanced input Impedance: >10 kOhm Max. Input Level: +21 dBu SC Output Connector: 1/4 in. TRS jack Type: RF filtered, DC de-coupled, unbalanced output Impedance: 2 kOhm Max. Output Level: +21 dBu System Specifications Bandwidth: 18 Hz to 30 kHz, +/- 3 dB Signal-to-noise ratio: > 100 dB, unweighted, 22 Hz to 22 kHz THD: 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1 0.04 % typ. @ +20 dBu, 1 kHz, Gain 1 IMD: 0.01 % typ. SMPTE Crosstalk: Stereo Coupling: true RMS detection Expander/Gate Section Type: IRC (Interactive Ratio Control) Expander Threshold: variable (OFF to +15 dB) Ratio: variable (1:1 to 1:8) Attack: Release: variable (SLOW: 100 ms/1 dB, FAST: 100 ms/100 dB) Compressor Section Type: IKA (Interactive Knee Adaption) Compressor Threshold: variable (-40 dB to +20 dB) Ratio: variable (1:1 to oo:1) Threshold characteristics: variable (Interactive or Hard Knee) Auto characteristics: Wave Adaptive Compressor Manual Attack Time: variable (0.5 ms/20 dB to 100 ms/20 dB) Manual Release Time: variable (0.05 ms/20 dB to 5 s/20 dB) Auto Attack Time: typ. 15 ms at 10 dB, 5 ms at 20 dB, 3 ms at 30 dB Auto Release Time: program dependent, typ. 125 dB/s Output: variable (-20 to +20 dB) Peak Limiter Section Type: IGC (Interactive Gain Control) Peak Limiter Threshold: variable (+4 dB to OFF (+22 dBu)) Ratio: oo:1 Stage 1 Limiter Type: Clipper Attack: "zero" Release: "zero" Stage 2 Limiter Type: program Limiter Attack program: dependent, typ. Release program: dependent, typ. 20 dB/s Function Switches SC Extern: switches the detector section to the external SC input SC Mon: monitoring the external SC input, disengaging the normal audio Interactive: enables the "Interactive Knee Adaptation" characteristics Contour: allows for frequency dependent detection Auto: enables the automatic and program dependent setting of the Attack-/release times, disengaging the manual Attack-/Release controls I/O Meter: switches between input and output for the Level Meter In/Out: relay-controlled hard-bypass Operating Level: changes the internal reference level from +4 dBu to 10 dBV CH 1 Master: linking both channels for stereo operation. Channel 1 becomes master Warmth: variable (+10 dB to +60 dB) Indicators Expander/Gate Threshold: 2 LED for under "+" and above "-" Compressor Threshold: 3 LEDs for under "+," Interactive in0lr and above "+" Peak Limiter Threshold: 1 LED for Indication of Limiter function Function switch: LED indicator for each Warmth: analog meter for the UTC circuitry Options Output Transformer: Behringer transformer OT-1 retrofittable Power Supply Mains Voltage: USA/Canada ~ 120 V AC, 60 Hz Fuse: 100-120 V AC: 1 A (slow-blow) Power Consumption: 25 Watts Mains Connection: standard IEC receptacle Physical Net Weight: approximately 8.0 kg Shipping Weight: approximately 10.0 kg
|
